Shower curtain rails for bathtubs
Interior designers and planners have been relying on shower curtain rails from PHOS for years to upgrade bathtubs in terms of function and design. Our brackets made of brushed, hand-polished stainless steel are slim, stable and adapt to any bath shape - for example in an L or U shape. They enable a bath to be converted into a fully-fledged shower solution. They can be installed either by screwing, ceiling mounting or gluing. Customisation is possible.
100% Made in Germany
Stainless steel shower curtain rail
Even a bathtub can be converted into a shower with a shower curtain on a solid and well-designed shower curtain rail. Interior designers have been working with our shower enclosures for bathtubs for many years, bringing colour and fabric to hotels and private bathrooms. With our stainless steel device as a system consisting of a solid but very slim shower curtain holder, we can follow any bath shape. This means that a bath can also be convincingly designed as a shower. We will find a good solution for every installation situation that is also formally convincing.
To the PDF catalogue
Half-circle curved
The half-circle curved shower curtain rail for bathtubs is an alternative to straight U-shaped curtain rails. The semicircle is concealed and attached to the wall with two drill holes. For support, you can choose between:
- straight ceiling suspension or
- angled wall suspension
. The spinning technology allows the curtain to run smoothly over the ceiling or wall support. Individual dimensions and radii of the semi-circular shape are available on request.
To the PDF catalogue
L-shaped shower curtain rail for bathtub
An L-shaped corner shower curtain rail for bathtubs provides splash protection on two sides. The shower curtain can be easily pulled through over the bracket to which the ceiling suspension is attached. The light and simple-looking angle construction made of solid elements is indestructible. The complete curtain rail set for a normal standard size is screwed through just three holes and can also be glued or suspended from the ceiling.
To the PDF catalogue
U-shaped shower curtain rail for bath
A U-shaped shower curtain holder for the bath provides splash protection on three sides. Our system made of solid - but very slim - stainless steel elements is mounted with two wall and ceiling fixings. There are suspension points at the corners, which are designed so that the shower curtain can slide easily over the entire length. Customised dimensions, alternative fixings and different arch shapes are possible. And if a ceiling suspension is not possible, an angled wall suspension can also be selected.
To the PDF catalogue
Round shower curtain rail as a circle or ring
Our round shower curtain rail is suitable for free-standing round showers or shower trays in a circle or ring shape. Attached with ceiling suspensions, the required height can be precisely adjusted. The circular shower curtain rail is hand-bent from solid 12 mm stainless steel and finely polished. It has a lightweight appearance and is secured with three concealed holes. We also offer the round shower curtain rail for installation in corners - e.g. as an all-round rail for bathtubs - and in a combination of ceiling and wall fixings. Our pull-through technology with matching curtain hooks ensures that the curtain can be pulled through beyond the slopes in any direction. In addition to our standard range, we also offer individual circular dimensions on request.
To the PDF catalogue
Oval shower curtain rail for bath
Our oval shower curtain rail is particularly ideal for a freestanding bath. It offers optimum space utilisation and creates a harmonious overall appearance together with the bath. The suspensions are designed so that the shower curtain can be pulled over the holders. We call this "pull-through technology".
To the PDF catalogue
Rectangular shower attachment for the bathtub
We can offer a rectangular shower attachment for practically any bathtub, even in niches. The ceiling bracket is mounted to the ceiling using a concealed sleeve and can be customised in height. The shower curtain can also be easily pulled over the sling supports of the ceiling suspension.
To the PDF catalogue
Shower curtain rail for corner bath by size
Different shapes and customised sizes are available for an L-shaped corner shower curtain rail. The respective length dimensions can be individually customised and ordered. Even difficult installation situations, completely suspended from the ceiling or for a bathtub under a roof slope, a shower is possible. We are happy to advise you on customised solutions.
Request
Sling-through technology
In order to be able to pull a curtain over a ceiling or wall suspension, we have developed the swing-through technology. The curtain hooks are shaped in such a way that they slide over the suspension and can be slung through unhindered. We therefore call the ceiling suspension or wall suspension a slinger.
Practical tips - good to know:
No, because the ends of our shower curtain rails have an internal thread and are made to measure. are made to measure. We are happy to customise the rods to your individual dimensions.
Yes, all our shower curtain rails can be customised. our shower curtain rails can be customised. Configurable directly in the shop or contact us via our contact form or by E-Mail >>. If you have any questions about planning, we will be happy to advise you.
With our wall and ceiling bearings (Article: STW) can be used to attach our shower curtain rails to roof slopes or sloping walls. An adjustment option and an individual angle are possible during installation.
The length of the shower curtain determines the length of the ceiling suspension (and vice versa). vice versa). Our recommendations for different installation situations can be found here
€340.00
€328.00
€348.00
€270.00
€350.00
€320.00
€280.00
€290.00
€370.00
€330.00
€360.00
€630.00
€650.00
€670.00
€690.00
Stainless steel in the best design - 100% Made in Germany
PHOS Design manufactures special products from stainless steel - but how? Some say the precision of the design is crucial; others believe it's the perfect hand-cut finish. Or is it the quality of the material? And let's not forget the location Germany: "Made in Germany" still stands for the highest quality. We are convinced that one link in the chain alone is not enough. It is the collaboration of a well-coordinated team that makes PHOS products unique. People who lend a hand and carry out what they do with dedication and expertise.
Each element is manufactured with precision, finished by hand and carefully polished by craftsmen. This showcases the high-quality stainless steel material and gives the surfaces a silky shine and pleasant feel. Only stainless steel of the highest quality in accordance with DIN is used.
PHOS exhibition - visit us in Karlsruhe!
If you would like to take a closer look at our products, receive personalised advice or buy directly from the factory, visit us in Karlsruhe.
Feel free to arrange an appointment with us!
What characterises our product line?
We produce products in the best form of goodness. Premium products are created in our manufactory by people who work hand in hand with enthusiasm and expertise. We are convinced that holistic production with little division of labour contributes to greater employee satisfaction.
We take into account the principles of the sustainability triangle: ecological, social and economic aspects are given equal consideration.
Service + Advice
Do you have any questions, would you like to place an order, or receive a quote?